Detailed method of using the wireless router Often there are rookie to ask how to use the wireless router, how to connect, how to connect the network, often post their own tutorials to them, and now re-send the previous tutorial. Take a wired connection to a desktop computer and a wireless connection to a laptop. Need equipment: one wireless router, two Rj45 dual-head cable (usually as long as it is not the first time online, the netizen has one, the wireless router package will be with the box), the early laptop does not have a wireless network card, A built-in or external wireless network card is required. Built-in requirements users have a certain ability to remove the manipulator, the external can be a USB interface, or a PCMCIA interface. The first part, physical connection The second part, network connection and other settings of the router: The role of the wireless router: the wireless router is to complete a small network device that is connected to the Internet, and can also complete the setup function of the small local area network, which is consistent with the function of the wired router, as long as the PC or the notebook terminal device with the wireless network card can be connected with the wireless router. With the use of. Connection of the wireless router: The wireless network card of the PC or the notebook is installed, and the wireless network card and the wireless router can automatically search and automatically complete the physical connection. If the desktop PC is connected in a wired manner, simply plug the original WAN port or the ADSL cat's Rj45 crystal head into one of the four LAN ports of the wireless router. After the physical connection between the wireless network card (wired) and the wireless router is established, the "internet protocol" is set to "automatically obtain the IP address" and "automatically obtain the DNS server address" in the connection "attribute" to be automatically assigned to the IP. address. General wireless routing does not require drivers, and there is no need to install management software. The management of the wireless router is performed in a web page. Open IE browser, enter the digital IP address specified by various wireless routers in the address bar and press Enter. You can enter the management interface of the wireless router in the browser. The management interface of most wireless routers is Chinese, as long as it is not too The netizens of the dishes are able to set the relevant settings needed. For example, the IP specified by the TP-l wireless router is 192.168.1.1, and the specified IP of the Buffalo wireless router is 192.168.11.1. You only need to connect the physical level to the address bar of any computer in the browser. Enter http://192.168.11.1, and then press Enter to enter the management interface of the wireless router. Originally using the virtual dial-up or online authentication of the network, it will be completed by the wireless router in the future. Once set up, it can be used for long-term service. The PC and notebook connected to the wireless router are not required to dial or authenticate after booting up (from this point of view, It is convenient before using the router.) The "user name" and "password" required for authentication are performed in the "WAN Settings" in the management interface after entering http://192.168.11.1 in the browser. In order to restrict the neighbors from accessing the Internet, the password can be set in the management interface. The PC or the notebook can confirm the password once in the first connection, and then no need to enter the password authentication after booting. In this way, the network connection is successful.
Perfect fit: The Hydrogel Screen Protector is designed with a Soft TPU material, which can be completely covered even on a curved device, providing perfect protection for the full coverage of the screen.
Oleophobic and waterproof: The use of hydrophobic and oleophobic screen coatings can prevent sweat, grease residue and fingerprints without reducing screen sensitivity. It is almost invisible on the screen and brings a high-definition visual experience.
Sensitive touch: ultra-thin and Soft Hydrogel Film with a thickness of only 0.14mm. As time goes by, it will self-repair minor scratches, provide you with a highly responsive screen protector and maintain the original touch.
Easy to install: The installation of the Protective Film is very simple, without air bubbles. The protective sticker can stay on the phone perfectly, and the bubbles will disappear within 24 hours.
If you want to know more about Hydrogel Screen Protector products, please click the product details to view the parameters, models, pictures, prices and other information about Hydrogel Screen Protective Film.
Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about the Hydrogel Protective Film!
Hydrogel TPU Protective Film,Ultra-Thin Protective Film,Soft Hydrogel Film,Hydrogel Film Screen Protector,Screen Protective Film,Mobile Phone Screen Guards Shenzhen Jianjiantong Technology Co., Ltd. , https://www.jjtscreenprotector.com
First, the connection between the wireless router and the superior device:
1. When the upper device is an ADSL digital cat: the output port of the ADSL modem is connected to the WAN port of the wireless router by a Rj45 double-head network cable;
2. The original network is the case of residential broadband or twisted pair access: in two cases, a is a relatively standard situation. There is a network cable terminal box on the wall, and the jack on the box and the WAN port of the wireless router. Connected with a Rj45 double-head cable; b network company technicians twisted the twisted pair into your home, did not make the terminal on the wall, only pressed a Rj45 crystal head on the line, in this case, put this Rj45 Insert the head into the WAN port of the wireless router;
Second, the wired connection between the wireless router and the desktop: still use the Rj45 dual-head network cable, one of the four LAN ports connected to the wireless router, and the other end is connected to the PCI cable network card behind the desktop;
Third, the wireless router and the laptop (the desktop is also the same) wireless connection: first correctly install the notebook (or desktop) wireless network card driver, so that the system recognizes and displays the wireless network card, be careful, the notebook also has to open the wireless network card Switch, set the Internet Protocol (TCP/IP) in the "Properties" of the wireless network card to "Automatically Obtain IP Address" and "Automatically Obtain DNS Server Address", then double-click the red fork small computer icon in the taskbar at the lower right corner of the desktop to enter In the “Wireless Network Connection Status†window, click “View Wireless Network†to enter the next “Wireless Network Connection†window, click on the “Refresh Network List†button in the upper left corner to search for your wireless routing signal. After receiving the signal, Click on it with your mouse and click on "Connect".
On any computer that completes the first part of the connection, open IE browser, enter the default address of the wireless router in the address bar and press Enter to enter the wireless routing management (the default address is generally 192.168.1.1, each brand wireless The management address of the router should be found in the manual).
1. ADSL dialing mode, select “Use PPPoE client function†in “WAN Settingsâ€, fill in the username and password left by your network provider in “User Name†and “Passwordâ€, and then select automatic dialing. Confirm and save. This is a one-time operation. After the wireless router is turned on, it will automatically dial up.
2. For the cell broadband without dialing and authentication, select “Automatically obtain IP address from DHCP server†in “WAN Settingsâ€;
Third, if the network provider assigns you a fixed IP address, select "Manually set the IP address" in "WAN Settings";
Fourth, the DHCP function in your wireless router's LAN settings should be enabled, in order to automatically assign IP addresses to your desktop and laptop, "automatically obtain IP address" and "automatically obtain DNS server" on your desktop and notebook. The address is based on this pairing.
5. If you don't want your neighbors to connect to your wireless router, share the wireless network with you, and squeeze your bandwidth, you should add a password in the "Wireless Security Settings". Your own desktop and laptop are in You can also join the same password when you connect. You only need to verify the password once. You don't need to enter it again after the next boot.
6. If you don't want to set a password, you can also use Mac address filtering to enable this restriction in the wireless router's "Mac access restrictions", and then log in the Mac address of your desktop and laptop wireless network card. List, your own device can be connected smoothly, other people's unregistered devices can not connect to your wireless network.