A qualified tuner must pass a few years of technical precipitation to get the voice that makes most customers happy, but if you really just learn to tune, these tips can help you and pay for the customer. Oh! First, tone compensation Bass compensation Midrange compensation Treble compensation Volume adjustment and sound quality compensation Second, how to adjust the ratio between the volume of the singing microphone and the accompaniment music? A good song, should be accompaniment music accounted for 40%, singing voice accounted for 60%, if the singer sounds good, you can appropriately reduce the weight of some accompaniment music to highlight the singer's song; if the singer to this song The melody is not very familiar, it is easy to sing and go, not to shoot, in order to cover up these shortcomings, then you can appropriately increase the weight of some accompaniment music. computer keyboard accessories,mechanical keyboard accessories,gaming keyboard parts,custom keyboard parts Dongguan Yingxin Technology Co., Ltd. , https://www.dgyingxintech.com
16Hz ~ 64Hz is the lowest sound, the current instrument can play the lowest sound is the organ, it can play 16Hz, so the low frequency of the human ear is generally not heard, but the body can feel; from 20Hz ~ 64Hz people The ear can be heard, but it must be played with a high-fidelity device. From 63Hz to 250Hz, it is the low range. It is the top priority of our bass compensation. This band is very important for music. It is the basis of music. The bass rhythm instruments belong to this frequency band. Good or bad, determines whether the music skeleton is complete. Therefore, the low-frequency characteristics should be flat, which can make the sound full and natural, of course, can also be compensated according to the requirements and preferences of the instrument.
From 250Hz to 2000Hz for the middle and low range, this frequency band is the least susceptible to loss during transmission and recording, and is the backbone of sound. 2000Hz ~ 4000Hz is the mid-high range, this band has an important contribution to the clarity and brightness of the sound, and is also our most important regulatory object. If the sound is turbid and the tone is too dark, the frequency band can be raised. When the sound is too hard, it can be attenuated to make it soft. When the sound is boring, it can be raised to make it bright, but if the sound is too much, the sound will be harsh. Languages ​​or songs usually have to adjust this band.
From 4000Hz to 8000Hz, the high-pitched area can maintain the characteristics of the flat line, and the naturalness of the sound is good when the flat line characteristic is maintained. It can also be attenuated or upgraded according to the content of the music and the characteristics of the sound source. However, it should be noted that the attenuation or lifting should be moderate and not too much, otherwise the sound will be unnatural or even metallic. Above 8000Hz is the highest sound zone. This frequency band has an important contribution to the timbre, and it is also our control object. It can be combined with the sound of the sound source to make appropriate compensation.
When the volume is small, pay attention to raising the low frequency and high frequency; when the volume is large, increase the intermediate frequency appropriately to enhance the brightness of the sound. The tuning is dominated by singing. Before the song appeared, gradually lower the accompaniment to highlight the song. The low frequency should be attenuated by 3dB~5dB, the high frequency above 7kHz should be attenuated by 3dB, the middle and low frequency can be increased by about 200Hz, and the 2kHz~4dB can be obviously improved by 3dB~6dB. For disco or rock music, pay attention to the high frequency (40Hz~100Hz) and high frequency (7kHz~20kHz).