Power Inverter,Sine Wave Solar Power Converter,Pure Sine Wave Solar Inverter,Pure Sine Wave Power Inverter Zhejiang Kaimin Electric Co., Ltd. , http://www.ckmineinverter.com Yes, for high-end players, 11.1 channel sound is not new. From the end of 2009, Denon was the first to launch the AVR-4810CI and 4310CI with Audyssey DSX processing function (see here for details), including Denon, Integra, Marantz and Onkyo have already launched related products, and even some brands of entry-level surround amplifiers are also equipped. I believe many readers of this site have experienced the wonders of Front Height and Wide effect speakers. The sound is magical. However, friends who continue to care about the development of home theater technology must know that the recent evolution of more channels has started at the CES show in early 2009, when Dolby Labs showed a "front height" for 5.1 or 7.1 systems. (Front Height's Dolby Pro Logic IIz, DTS and Audyssey Labs, known for its automatic sound field correction technology, also showcased 11.1 channel technology with superior performance (plus two additions to Front Height) Channels). After the CES 2009 show, Dolby Pro Logic IIz and Audyssey DSX were launched in mid-2009 and at the end of the year, but DTS's Neo:X has been slow to see any movement, which can make many senior family theater players worry-- ─Because DTS has always had better and more comprehensive sound performance than competitors, DTS is definitely the top priority for the “best-demand†video players. 
Finally, although Dolby Pro Logic IIz and Audyssey DSX are more than a year later, the rumors that DTS Neo:X will be officially launched at the beginning of this year, the closer to the middle of the year, the more relevant information becomes clearer. A few days ago, this site learned that DTS Global Application Engineering Director Kenichi Fujisaki came to Taiwan to participate in the "2011 Taipei International Computer Show" from May 31st to June 4th. Of course, I have to seize the opportunity to explore DTS Neo: The first hand related information of X. In fact, veteran players know that this is not the first time DTS is "late". In the past few times, the new technology was officially launched. DTS is almost always half a year or more than the opponent. I saw the first question of Director Fujisaki is why DTS Neo:X was publicly displayed as early as 2009, but it took more than two years to officially launch. Director Fujisaki said that it was because of the conceptual demonstration of the function at the time. The single chip of the complete processing function has not yet been developed and completed, so it takes such a long time to mass-produce; on the other hand, DTS is always dedicated. It is imperative that the relevant research and the department be optimized to officially launch the new technology. Take DTS Neo:X as an example. It is the world's first algorithm that converts 2.0/5.1/6.1/7.1 channel audio to 9.1/11.1 channel audio, whether you enjoy movies, music or video games. Come to a wider sound field, a richer sense of envelopment and a more distinct sound positioning.
I was shocked by the DTS Neo:X speaker configuration shown by Director Fujisaki! Because CES was exhibited at the beginning of 2009, DTS Neo:X added two channels behind the listening position in addition to the effect channel on the left and right sides, respectively, at the side rear and the left and right side channels at an angle of 30 degrees. The rear channel is placed at a position 30 degrees apart. But this officially produced DTS Neo:X speaker configuration, the two sides of the rear side of the speaker have moved to the outside of the left and right channels (the orange surrounding is surrounded by DTS Neo: X four channels) . Why is there such a huge change? Director Fujisaki said that it was due to repeated tests. DTS finally believed that regardless of the focus of the film, music or game, the four surround speakers at the side and rear of the stage could create enough envelopment, so they would "listen to the water level". The two new speakers are moved to the outside of the left and right channels.
In any case, for home theater players, DTS Neo:X this speaker configuration change is definitely a big good news - because, as a result, DTS Neo: X added four channel speakers Configuration, almost the same requirements as Audyssey DSX, users do not have to add two more speakers in order to be compatible. As for the configuration map above and the CES venue, DTS seems to have listened to the seats around the center of all the speakers, but the average family can hardly be installed like this! Director Fujisaki said that this is the "best situation", but it is indeed impossible to do in most home environments. It can only be corrected by the delay time adjustment of each speaker and listening position.
DTS Neo:X is the only audio processing technology that can convert 2.0/5.1/6.1/7.1 channel LPCM signals to 7.1 Front Height, 7.1 Wide, 9.1 or 11.1 channels. That's right, DTS Neo:X is a post-processing technology built into the surround amplifier (or processor) hardware, but like the DTS-ES 6.1 channel encoded DVD software in the past 5.1-channel DVD era, BD software regardless of the movie Or music content can be optimized for Neo:X to achieve better 11.1 channel playback.