1. About selection: In general, spotlights are a highly concentrated luminaire whose main function is to highlight the object being illuminated. For example, paintings hanging on the wall, decorations, or some accessories in the space. This causes the illuminated object to jump out of space to attract the viewer's gaze. It can also be used as a relatively strong visual guide. For example, the continuously arranged spotlights illuminate the ground vertically, create a channel with light spots, and achieve the purpose of moving line guidance and space division in corridors or spaces without obvious separation. 2. About the installation: The characteristics of the spotlight are destined to be more serious than other lamps, of course, you can choose anti-glare spotlights. But because of the adjustability of the angle, it will still cause a certain degree of discomfort to the person facing it. Therefore, as far as possible, the installation should be perpendicular or angled to the wall (non-glass partition) to achieve the object to be illuminated. 3. About the installation of spotlights in the restroom: Personally think that as a part of the lighting to create an atmosphere, in addition to the spotlights should not deal with people in the space, hidden lights are a good choice. In addition, when the light passes through the mirror to form a diffuse reflection and then illuminate the face, you will not want to look away, because it must be much more beautiful than you. However, the light source here is not suitable for spotlights. Please see item 2 for the reason. In fact, the mirror headlights still need to exist. In addition to the auxiliary lighting, choosing a soft mirror headlight with the aforementioned main light source can not only see the makeup of the face but also make the skin look better. here is the image: The mirror cabinet has a hidden led light strip, modern style; Ibid., Jane Ou or rural style; If you don't like the mirror cabinet hidden or don't plan to buy a mirror cabinet, you can hide it in the ceiling. If you don't like the mirror cabinet hidden or don't plan to buy a mirror cabinet, you can hide it in the ceiling. In response to the question, I feel that the above solution can be solved. The light strip emits light upwards and then forms a soft diffuse reflection on the gypsum board ceiling, and then shines on the subject's face. The effect is basically the same as the soft light board. Of course, there are other ways: That is the installation of the downlight in the mirror cabinet. . . (This is different from the above!) That is the installation of the downlight in the mirror cabinet. . . (This is different from the above!) Come again: Drain the lamp or T4 tube in the wall. Of course, your bathroom should be big enough to be so tossed (usually to match the wall of the wall-mounted toilet). The effect is also excellent. The light is soft and even, and the mirror cabinet does not need to stand out. Drain the lamp or T4 tube in the wall. Of course, your bathroom should be big enough to be so tossed (usually to match the wall of the wall-mounted toilet). The effect is also excellent. The light is soft and even, and the mirror cabinet does not need to stand out. Well, the question of the subject is how to select and install the spotlights. In fact, I want to say that the spotlights are generally not used in the bathroom. What you said should be the downlights. As for the reason, once the spotlight has a strong ability to collect light, it will cause glare in front of the mirror, just like the situation that the subject encountered. Second, the concentration of light will cause local temperature problems (refer to the principle of Yuba). Spotlights are generally used in end views or long corridors to set off the atmosphere or divide the area, as shown in the figure: The crystal clearness of the waterscape sculpture came out instantly. In fact, the use of spotlights in home decoration is becoming less and less, and the lamps used on the sofa wall and TV background wall are mostly LED downlights . In addition to the two reasons mentioned above, there are also spotlights that may affect the experience of watching TV. The advantage of the downlight is that the lighting is soft and the illumination can be guaranteed in the area. The difference between the spotlight and the spotlight is almost the same, I will not repeat it. The downlight is generally like this in the bathroom: The illumination of the two downlights is sufficient. The illumination of the two downlights is sufficient. In the next villa: Is it tall? In fact, the illumination in front of the mirror is only a combination of LED lights and downlights. Is it tall? In fact, the illumination in front of the mirror is only a combination of LED lights and downlights. When the spotlight is illuminated on the vertical ground, it is only suitable for short-time opening. It has achieved the function of guiding the walkway. It is not suitable for long-time illumination (which will cause light pollution). The set of drawings at hand can be explained, similar to the red circle below. section. If it is an angle-adjustable spotlight, it is mostly directly illuminating the wall, emphasizing an area on the wall, such as decorative paintings, photo walls, etc., sometimes it is possible to use this means to imply the area to form the segmentation of the space. , similar to the "stomata" that we left between the words in the graphic design, as shown in the red circle below. If it is an angle-adjustable spotlight, it is mostly directly illuminating the wall, emphasizing an area on the wall, such as decorative paintings, photo walls, etc., sometimes it is possible to use this means to imply the area to form the segmentation of the space. , similar to the "stomata" that we left between the words in the graphic design, as shown in the red circle below. The vertical direction of the top of the dresser is not suitable for spotlights. In this case, consider choosing a mirror headlight with appropriate illumination and color temperature and adjustable angle. Or like the mirror of a lighting brand that I prefer. It is recommended to go to the Uniqlo in your city to see if there are not many spotlights but the location is in place. You can't help but look at yourself when you stand in front of his mirror. Is it a bit of a question, don't like to skip it. . Lighting is specially designed for hotels with higher grades (four or more stars) and commercial establishments. Where to install what lights, what light source, what color temperature, how big angle, how to light... are all factors to consider. How to achieve the best lighting effect is a very systematic problem, and the specific situation should be arranged. Lighting designers and lighting design companies are doing this. The following is a detailed analysis of the situation encountered by the subject. The lighting scheme of the guest room is: a downlight is installed in the middle of the room to provide basic lighting. A spotlight is installed directly above the basin, toilet, and shower room (the mobile phone party cannot provide pictures). Spotlights have the following effects: 1. Provide key lighting and highlight the grade of the material. The marble and high-grade ceramic basins are all brightly lit, so there is no such thing as a grade, and you have seen gold-plated faucets. You have seen tens of thousands of pieces of hardware in the presidential suite. People have spent a lot of money and definitely want to highlight it. 2. Reflect the sense of spatial hierarchy. Light can reflect the layering of a space and increase the fun of space. It is not difficult to understand the difference between the lighting of an office with a very uniform brightness and the lighting of a well-defined museum. 3. Divide the area. What should I do if the bathroom space is small and there are several areas with different functions? Use light to achieve. 4. Improve the illumination in front of the mirror to make it easier for the user to see the details of the face. All of these factors can be considered in a comprehensive way to achieve the best lighting results. The subject said that he was photographed with a shadow. It is because the light is very concentrated and it is caused by vertical illumination from the top of the head. To solve this problem you can: 1. Adjust the angle of the spotlights inward so that the light is reflected through the wall and then shines on the face. 2. Supplement vertical illumination. Add mirror front lights, wall lights or light troughs around the mirror.
The DC Source System has high power density, short response time, high accuracy and full protection. The Programmable Power Supply has been widely adopted in production line, burn-in test, laboratories and integrated system etc. With various communication interfaces, apm DC Power Supply can be remote controlled from computer.
Some features as below:
120V DC Source System,Industrial Power Supply,DC Solar Small Power System,Dc Power Source For Lab Test APM Technologies (Dongguan) Co., Ltd , https://www.apmpowersupply.com