Type C Charger
Type-C Charger also call USB-C charger.A charger with one or more USB-C ports can be connected to the USB-C cable.The type-C charger can be used to quickly charge many popular devices, including the MacBook Pro and Nintendo Switch, and transfer data faster than any other USB type.The Type C charger is the newest and most widely available charger.
Type C Charger,Anker Power Port Atom,Xcentz Portable Charger,Usbc Wall Adapter Pogo Technology International Ltd , https://www.wisesir.net Projector daily maintenance and repair methods:
1. Do not install this projector on an unstable surface. Do not place the projector on a swaying car, desk, or table.
2. Do not place the projector in a container containing liquid. Do not place vases, pots, cups, cosmetics, liquids (such as water) on top of this projector.
3. Please use the accessories only in the recommended way, do not damage, cut, handle or twist the power cord.
4. Use the power type as selected by the options on the projector. If you are unable to confirm, please consult your dealer and local electrical company.
5. Place the projector near a wall socket that allows easy removal of the plug.
6. Insert the grounding three-pin plug of the projector into a properly grounded socket. If you are using a two-pin socket, please replace the electrician with a three-pin socket. Do not insert or remove the plug with wet hands.
7. When plugging and unplugging, please pay special attention to the following operations. Violation of the procedures will cause Mars or fire.
(1) Do not insert the plug into a dusty socket.
(2) Make the plug and the socket in close contact.
8. Do not overload the power outlet. Overloading the wiring or socket may cause fire or electric leakage.
9. Do not place the projector where the power cord is easily stepped on, otherwise the power cord may be worn.
10. When cleaning, please pull the plug out of the socket before cleaning. Please use a damp cloth to clean it. Do not use liquid or alcohol cleaner.
11. Do not block the ventilation slots and ventilation openings on the projector cover. The above openings provide the necessary ventilation for the machine to prevent the projector from overheating. Do not place the projector on a sofa, mat or other soft object surface, or in a closed cabinet, unless a good ventilation is ensured.
12. Do not insert anything from the vent into the projector. Do not pour any liquid into the projector.
Projector daily maintenance and repair methods (2)
13. Unplug the projector when you are not using it for a long time.
14. Please do not place the projector and remote control on a heating device or a hot place, such as a car.
15. When the following occurs: Unplug the projector from the wall outlet and ask a professional service person.
(1) When the power cord or plug is damaged or damaged,
(2) If you accidentally put the liquid into the projector or the projector is exposed to rain and water,
(3) If you do not operate properly in accordance with the operating procedures, or the performance of the projector is abnormal,
(4) If there is a fall or a disaster in the house.
16. The interior of the mainframe uses many glass products such as lenses and light sources. If the light source lamp is broken, please pay full attention when handling, to avoid being scratched by debris, and please contact the dealer, especially in the case of ceiling use, when the light source lamp cover is turned on, fine glass fragments may fall. Take full care to prevent debris from falling into your eyes or mouth.
17. When using the projector, the material or paper may block the air filter under the projector. Removing any objects under the projector that block the air filter.
18. Please do not remove the projector immediately after use. Doing so can cause serious burns. Before removing the lamp, turn off the power and wait until the time specified in the instruction manual is fully cooled.
19. Do not damage the projector or subject it to any collision.
Projector daily maintenance and repair methods (2)
20. Do not use the projector after the replacement period has passed. Once the replacement period is exceeded, the likelihood of the projector rupturing increases. When the replacement projector information appears, replace it with a new one as soon as possible.
a). The gas of the silver lamp contains mercury vapor. If the lamp breaks, immediately ventilate the house to prevent gas leaking from the lamp from being blown into the mouth or into contact with the eyes.
b). Do not put the face close to the projector with the projector to avoid the gas leaking from the projector lamp being sucked into the mouth or in contact with the eyes.
c). If the projector lamp is broken and you need to replace it with a new one, please contact the dealer where you purchased the product or contact the nearest dealer for replacement. The projector lamp is broken and pieces of glass are scattered throughout the projector.
d). Especially in the case of the top-down installation, small pieces of glass may fall off when the projector lamp cover is opened. If you are cleaning the projector yourself or replacing the lamp, take care to prevent debris from falling into your eyes or mouth. If the lamp breaks, the leaked gas is sucked into the mouth or glass fragments fall into your eyes or mouth, or any other adverse reactions are found, consult your doctor immediately.
21. If there is thunderstorm, please do not touch the power plug, otherwise it may cause electric shock.
22. Clean the inside of the projector every two years. Ask your dealer to clean the inside of the projector approximately every two years. If it has not been cleaned for a long time, dust accumulated inside the projector may cause fire or malfunction. Cleaning is more effective before each wet season (eg rainy season, etc.). Ask your dealer about the details of internal cleaning.
23. If the remote control uses a button-type battery, keep the battery out of the reach of children. If swallowed, the battery can cause suffocation and is very dangerous. Once the battery is swallowed, please ask your doctor for help.
The original text is from [Bitnet], please reprint the original link: http://oa.chinabyte.com/468/11167468.shtml 
