Our Cat6 Flat Ethernet Cable provides high performance, as it uses 250Mhz to transfer data up to 1Gbps, faster than CAT5E. Allowing for greater bandwidth and, therefore, home and office productivity.
Super five line identification is "CAT5E", bandwidth 100M, is the mainstream product;The identification of the six lines is "CAT6", with a bandwidth of 250M, used to set up gigabit network, which is the trend of future development.
Cat6 Flat Ethernet Cable FLAT,Cat6 Cable,Cable Ethernet Flat 26/28AWG,Cat6 Flat Ethernet Cable Shenzhen Kingwire Electronics Co., Ltd. , https://www.kingwires.com
High-frequency induction lamp installed on Xingyi Avenue (smoke factory section).
Vigorously promoting energy conservation and emission reduction and developing a low-carbon economy have become the consensus of the whole society. The Orange Mountain Working Committee of Xingyi City, Guizhou Province, first introduced the high-frequency induction lamp renovation project (pilot) in the province in February this year, and used it in Xingyi Avenue (smoke factory section) to replace the original high-pressure nano lamp with high frequency. Infinite fluorescent lamp. Through testing, the average power consumption of more than 100 street lamps in this section has been reduced from 79 KW (kilowatt) before the renovation to about 19 KW (kilowatt), becoming the leading soldier in the southwestern Guizhou and even the province's energy-saving new light source.
New green light source high frequency electrodeless fluorescent lamp
According to Zhu Yuxiang, deputy manager of Xingyi City Anju Property Co., Ltd., owner of the street lamp energy-saving renovation project, and electrical engineer Zhu Yuxiang, since the birth of the first generation of lighting products represented by incandescent lamps, the current high-frequency electrodeless lamps have come out, lighting The lamps and lanterns have undergone four generations of innovation and development. Each generation of lighting fixtures has played a role in energy saving and emission reduction, and the luminous efficiency of the products has increased by 30% and 40%. The so-called induction lamp, also known as electromagnetic induction lamp, is a high-tech electric light source developed in the late 1990s. It has no electrode and no filament, and is followed by mercury, sodium, energy-saving lamps, metal halide lamps and other light sources. The fourth generation of electric light source. The electrodeless lamp combines the advantages of a variety of advanced electric light sources: high efficiency, energy saving, long life, environmental protection, high color rendering, light color, no stroboscopic phenomenon, no radiation, etc. It is the most promising type in the 21st century. Green energy-saving and environmentally friendly electric light source.
At present, China's production of electrodeless lamps accounted for 90% of the world, and all have independent intellectual property rights and core technology, but Chinese consumers have a low level of awareness of the electrodeless lamp, which is basically in the early stage of promotion. It is understood that in recent years, the country has promoted the use of induction lamps in several provinces, cities and regions such as Hunan Lushan, Liaoning Huludao City, Zhejiang Ningbo (city and 7 townships), Yang Liwei Feitian Plaza, Shougang, etc., and achieved significant energy saving. Consumed effect.
The government does not spend a penny on Xingyi Avenue to replace the induction lamp
In October 2009, the Xingyi City Orange Mountain Working Committee decided to implement the Xingyi Road Light Energy Saving Reconstruction Project. After organizing relevant professionals to go out for investigation, research and serious research, it was decided to use Xingyi Avenue (smoke factory section) as a pilot project for energy-saving renovation projects. A total of 186 high-voltage nano lamps of 93 light poles on the road section were replaced with high-frequency electrodeless Fluorescent light. In January of this year, it officially and Guizhou Quanyi Energy Conservation and Environmental Protection Technology Co., Ltd. finalized the street lamp energy-saving renovation project, which was implemented and managed by Xingyi City Urban Central District Construction Management Committee authorized Xingyi City Anju Property Co., Ltd. The specific mode of operation is: the government does not have to spend a penny of investment. After the contract is signed, the investor will replace the lamp for free at one time. In the first five years of use, the investment and the owner unit (Xingyi City Orange City Central District Construction Management Committee) will be separately reported from the annual savings of electricity by 5%. That is, the energy saving fee for the first year is returned to the investor by 95%, and the owner is 5%; the second year is declining and increasing by 90% of the investor and 10% of the owner. In five years of use, the damage of the luminaire is completely replaced by the investor; after five years, all the right to use the street lamp is completely handed over to the owner for use and management. The project was officially implemented on February 3 this year. Before and after the lamp is changed, the investor and the owner respectively carried out a three-day test on the current, voltage, power factor and actual power consumption of the high-voltage nano lamp and the replaced high-frequency electrodeless fluorescent lamp that were being used at that time. Finally, the two sides signed the "Certificate of Power Saving Rate". After replacing the 250W high-voltage nano lamp with the high-frequency electrodeless fluorescent lamp of Beijing WJTG150W, both parties confirmed that the power saving rate was 79%. The confirmed power saving rate is used as the basis for Party B to recover the cost. Because the lamp also has long life, high luminous efficiency, instant lighting, continuous dimming, no flicker, high brightness, as the owner authorized to participate in the implementation, use and management of the energy-saving lamp project of the road section, Xingyi City Anju Property Limited Zhu Yuxiang, the person in charge of the company, believes that the high-frequency electrodeless lamp is indeed a mature high-efficiency energy-saving and environmentally-friendly lighting product. It is a revolutionary product that truly belongs to the new energy-saving light source and is worthy of promotion.
The power saving effect is obviously bright and the prospects are bright
According to Deputy Manager Zhu, the total cost of streetlights in Xingyi is about 5 million yuan per year. The total streetlights in the Orange Mountain New District alone are 1,560. In 2009, the Tongshan Working Committee spent a total of 1.37 million yuan on street lighting. It is estimated that the street lamp fee in the Huangcao area is about 1.5 million. This year's electricity bill will rise from 0.73 yuan per year to 0.77 yuan per degree. The annual electricity bill for the Orange Mountain New District may be more than 1.5 million yuan. With the rapid development of urbanization construction, the number of street lamps will increase greatly, and the cost of public utilities in the city will also increase, and the burden will be heavy.
In order to actively implement the national energy conservation and emission reduction (consumption reduction) policy, the street lamp power supply and energy saving mode in the Orange Hill area is solved by increasing the number of lights in different periods, that is, at 19:00, 22:00, it is fully bright; at 22:00 It is two-thirds bright at 24:00 and one-third at 7:00 in the morning of 24:00. Deputy Manager Zhu said that in order to further increase the effectiveness of energy conservation and emission reduction, in 2009, the Xingyi City Orange Mountain Working Committee implemented a pilot project for energy-saving renovation projects. After testing, the average power saving power of the high-frequency electrodeless lamp is 79%. After one month of implementation, the meter reading data from the property company shows that the electricity fee is only 3,000 yuan, compared with the same period of last year, the average saving is 7,000 yuan, saving electricity. The effect is obvious. This is a delightful and energy-efficient product. According to this data, after the renovation of all street lamps, the electricity cost of the street work of the Orange Mountain Working Committee will only be around 360,000 yuan. According to this saving rate, the entire Xingyi City street lights are replaced with high-frequency electrodeless lamps, saving electricity costs of more than 3.8 million yuan a year.
Energy saving and environmental protection is the biggest advantage of the electrodeless lamp
According to relevant information, high frequency electrodeless lamps have many features and advantages. 1. The electrodeless lamp has no filament or electrode and other inevitable components that limit the life of the light source. It is not subject to frequent switching restrictions. The service life can reach 60,000 hours, 60 times that of incandescent lamps, and 12 times that of high-quality energy-saving lamps, sodium lamps and metal halide lamps. Once installed and used, it requires no maintenance for many years, greatly reducing maintenance troubles and replacement costs. It is especially suitable for places where lamp replacement is difficult and expensive, and important places where safety requirements are high, such as tunnels, complex traffic areas, subway stations, and ceilings. High factory buildings, dangerous area lighting, halls, sports fields, etc. 2. The electrodeless lamp is based on the principle of gas discharge and electromagnetic induction, which is efficient, energy-saving and environmentally friendly. Under the same brightness, it can save more than 80% energy than incandescent lamps, more than 30% energy saving than electronic energy-saving lamps, and more than 40% energy saving than mercury lamps, sodium lamps and metal halide lamps. The amalgam contained in the electrodeless lamp chamber can also be recycled without pollution. 3, ultra-low voltage start, 88V voltage works immediately, adapt to the global voltage. The lamp will still work normally when the voltage fluctuates. The electrodeless lamp has a very high operating frequency, and the stroboscopic effect of the light flux caused by the current zero crossing is completely eliminated, which protects the eye's vision health, helps improve labor safety, and can be used for a DC power source. 4, in the ambient temperature of -20 ° C to +50 ° C, the electrodeless lamp can be turned on and off, no need to preheat, and electronic energy-saving lamps, mercury lamps, sodium lamps and metal halide lamps need 3 to 15 minutes of warm-up time .
As a mature new energy source with high efficiency, energy saving and environmental protection, the electrodeless lamp has entered the mature stage of the market and will occupy an increasingly important position in the lighting market. 
Cat 6 Flat Ethernet Patch Cables are designed for high density environments where clearance and space is limited.
CAT6 Ethernet Cable is manufactured in our own factory with 4-pair oxygen-free pure copper and RJ45 connector plugs with FU gold-plated contacts with molded strain relief snagless boot. Our high-speed Category 6 Ethernet cable has an in-wall PVC jacket.
CAT5E of twisted pair also use 4 winding pairs and 1 anti-tension wire, the color of the pair is exactly the same as the CAT6 of twisted pair, namely white orange, orange, white green, green, white blue, blue, white brown and brown respectively.
Although the CAT5E of unshielded twisted pairs can provide up to 1000Mb/s of transmission bandwidth, they often need to be supported by expensive special equipment.Therefore, it is usually only used for 100Mb/s fast Ethernet to connect desktop switches to computers.If you are not prepared to upgrade your network to gigabit Ethernet in the future, then you might as well use CAT5E of unshielded twisted pair in horizontal wiring.
CAT6 of unshielded twisted pair: all parameters of the six classes of unshielded twisted pair have been greatly improved and the bandwidth has been extended to 250MHz.The CAT6 of twisted pair are different from the CAT5 or CAT5E types of twisted pair in shape and structure, which not only increases the insulated cross skeleton, but also places the four pairs of twisted pair wires in the four grooves of the cross skeleton, and the diameter of the cable is also thicker.
In addition to the traditional voice system still use three types of twisted pair, network cabling is basically using CAT5E or CAT6 of unshielded twisted pair Ethernet cable.