High Pressure Washer Crankshaft Oem Crankshaft, Crankshaft,Auto Cylinder,Other Auto Parts Generator Crankshaft,Engine Crankshaft Co., Ltd. , http://www.nbcrankshaft.com
SJE SF2â„¢ float switch is a suspended float switch designed to monitor levels in nonmagnetic tanks (e.g. of stainless steel or plastics). Thanks to the "Flexible Connection Float" technology, it can avoid the interference of the dirties, thus it is very suitable for use in extremely dirty liquids, like septic tank .Â
The switch body mounted on the side wall of the tank with the G¾" screw sleeve. A plastic float suspended on the end of a stainless steel cord. Float and cord are inserted in the tank through a G¾" screw plug. As the float rises with the level of the liquid, a permanent magnet inside the float actuates the magnetic switch inside the G¾" screw plug, providing an upper or lower level signal .Â
Switching points are provided 10±5 mm below or above the centre line of the G¾" screw plug. A special plastics sealing ring protects the G3/4 screw plug against the thread of the welding sleeve. Thus, only a little sealing material is required when first time installation.
•  No jamming of the freely movable float .
•  Suited for extremely dirty liquids, e.g. septic tank, oily wastewater.
•  Easy installation. Only a little sealing material is required.
•  High precision magnetic switch design.
•  Integral watertight cable (comply with TJ/CL254-2013(V1.0).
•  Registered utility model
•  Tested according to EN 50155 (approved for use on rail vehicles)
Technical Specification:
Operating voltage
24VDC (16V to 35V DC)
Operating current
15mA
Maximum output
35VDC, 0.2A
Contact capacity
3W/VA max.
Switching point
10 ± 5 mm below or above the
centre line of the plug (refer to mounting
drawing)
Mounting
G¾" screw plug
Installation clearance
> 60 mm
Electrical connection
2x0.5 mm² cable, halogenfree cable speciallized for rail vehicles
Working temperature
- 40 °C ~ 70 °C
Storage temperature
- 55 °C ~ 70 °C
Operating pressure
≤ 110 kPa (1.1bar)
Liquid density
≥ 800 kg/m³
Testing
As per EN 50155
Protecting grade
IP67
Vibratory strength
20 m/s² (5 to 150 Hz)
Shock resistance
50 m/s²
Float material
NBR
Switch materialÂ
Copper with special coating
Weight
Approx. 0.25Kg
Order information:
Part Number
Description
1055480Y
SJE SF2TM reed switch, 15mA, 24VDC,
Normally Open.
1042485Y
SJE SF2TM reed switch, 15mA, 24VDC,
Normally Closed.
Company Introduction:
SJE-Rhombus (S. J. Electro Systems, Inc. ) was founded on July 2, 1975 by Steve Johnston. Over 40 years later, SJE-Rhombus has grown into a leading manufacturer of reliable, trouble-free liquid level controls for the water, wastewater and sewage industries throughout the United States and Canada, as well as into global markets.Â
SJE-Rhombus offers a wide variety of control products for residential, commercial, municipal, and industrial markets. From control panels utilizing embedded circuit board technology, to complete control and monitoring systems designed and built to individual specifications, SJE-Rhombus represents the most reliable integration of engineering and manufacturing capabilities in the industry.Â
SJE Rhombus Suzhou factory is 100% subsidiary company of SJE Rhombus. We offer a wide variety of control products for residential, commercial, municipal, and industrial markets. We had ISO9001: 2008 certification, and UL, cUL, CSA, TUV, CE certification. From float switches, alarms, control panels to complete control monitoring systems designed and built to individual specifications, SJE-Rhombus represents the most reliable integration of engineering and manufacturing capabilities in the industry.Â
New product desgins endure extensive in-house and field testing before submittal to recognized independent laboratories for safety testing and approval (UL, cUL, CSA, CE). Each product is constructed of materials of the highest quality with expert workmanship and delivered in responsive lead times. This commitment to quality ensures you a dependable, trouble-free product.Â
Contacts:
Â
Features:
SJE SF2â„¢ float switch is a suspended float switch designed to monitor levels in nonmagnetic tanks (e.g. of stainless steel or plastics). Thanks to the "Flexible Connection Float" technology, it can avoid the interference of the dirties, thus it is very suitable for use in extremely dirty liquids, like septic tank .Â
The switch body mounted on the side wall of the tank with the G¾" screw sleeve. A plastic float suspended on the end of a stainless steel cord. Float and cord are inserted in the tank through a G¾" screw plug. As the float rises with the level of the liquid, a permanent magnet inside the float actuates the magnetic switch inside the G¾" screw plug, providing an upper or lower level signal .Â
Switching points are provided 10±5 mm below or above the centre line of the G¾" screw plug. A special plastics sealing ring protects the G3/4 screw plug against the thread of the welding sleeve. Thus, only a little sealing material is required when first time installation.
•  No jamming of the freely movable float .
•  Suited for extremely dirty liquids, e.g. septic tank, oily wastewater.
•  Easy installation. Only a little sealing material is required.
•  High precision magnetic switch design.
•  Integral watertight cable (comply with TJ/CL254-2013(V1.0).
•  Registered utility model
•  Tested according to EN 50155 (approved for use on rail vehicles)
Technical Specification:
Operating voltage
24VDC (16V to 35V DC)
Operating current
15mA
Maximum output
35VDC, 0.2A
Contact capacity
3W/VA max.
Switching point
10 ± 5 mm below or above the
centre line of the plug (refer to mounting
drawing)
Mounting
G¾" screw plug
Installation clearance
> 60 mm
Electrical connection
2x0.5 mm² cable, halogenfree cable speciallized for rail vehicles
Working temperature
- 40 °C ~ 70 °C
Storage temperature
- 55 °C ~ 70 °C
Operating pressure
≤ 110 kPa (1.1bar)
Liquid density
≥ 800 kg/m³
Testing
As per EN 50155
Protecting grade
IP67
Vibratory strength
20 m/s² (5 to 150 Hz)
Shock resistance
50 m/s²
Float material
NBR
Switch materialÂ
Copper with special coating
Weight
Approx. 0.25Kg
Order information:
Part Number
Description
1055480Y
SJE SF2TM reed switch, 15mA, 24VDC,
Normally Open.
1042485Y
SJE SF2TM reed switch, 15mA, 24VDC,
Normally Closed.
Company Introduction:
SJE-Rhombus (S. J. Electro Systems, Inc. ) was founded on July 2, 1975 by Steve Johnston. Over 40 years later, SJE-Rhombus has grown into a leading manufacturer of reliable, trouble-free liquid level controls for the water, wastewater and sewage industries throughout the United States and Canada, as well as into global markets.Â
SJE-Rhombus offers a wide variety of control products for residential, commercial, municipal, and industrial markets. From control panels utilizing embedded circuit board technology, to complete control and monitoring systems designed and built to individual specifications, SJE-Rhombus represents the most reliable integration of engineering and manufacturing capabilities in the industry.Â
SJE Rhombus Suzhou factory is 100% subsidiary company of SJE Rhombus. We offer a wide variety of control products for residential, commercial, municipal, and industrial markets. We had ISO9001: 2008 certification, and UL, cUL, CSA, TUV, CE certification. From float switches, alarms, control panels to complete control monitoring systems designed and built to individual specifications, SJE-Rhombus represents the most reliable integration of engineering and manufacturing capabilities in the industry.Â
New product desgins endure extensive in-house and field testing before submittal to recognized independent laboratories for safety testing and approval (UL, cUL, CSA, CE). Each product is constructed of materials of the highest quality with expert workmanship and delivered in responsive lead times. This commitment to quality ensures you a dependable, trouble-free product.Â
Contacts:
Â
Model NO.: SJE SF2
Mounting: G3/4" Screw Plug
Operating Voltage: 24VDC (16V to 35V DC)
Operating Current: 15mA
Weight: Approximate 0.25kg
Trademark: SJE Rhombus
Transport Package: Box Packing
Origin: China
HS Code: 85365000
Model NO.: SJE SF2
Mounting: G3/4" Screw Plug
Operating Voltage: 24VDC (16V to 35V DC)
Operating Current: 15mA
Weight: Approximate 0.25kg
Trademark: SJE Rhombus
Transport Package: Box Packing
Origin: China
HS Code: 85365000
Features: