Red LED illumination is good for brain damage treatment

Red LED illumination is good for brain damage treatment

A recent study by Chongqing University showed that red light LED irradiation is beneficial for bone marrow mesenchymal stem cell transplantation in the treatment of hypoxic-ischemic brain damage. The results of this study have been published in Nerve Regeneration Research, Vol. 9, No. 3, 2014.

Previous studies have shown that the neuron differentiation rate of bone marrow mesenchymal stem cells can reach 78%-92% when cultured in vitro, but the efficiency, survival rate and differentiation rate in transplantation in vivo are very low, and the actual treatment effect is not good. Related studies have shown that 600-1,000 nm of red or near-infrared light can promote cell migration and reduce cell death. The team at Chongqing University found that using 660 nm and 60 mW/cm2 red LEDs for 40 hours, more green fluorescent-labeled BMSCs migrated to primary neurons damaged by hypoxia-ischemia.

40V DC Electronic Load

40V DC Electronic Load have multiple options for different power.Full protection includings OCP, OPP, OTP, over voltage and reverse alarm. Support external control and monitor mode, the 0 to 10V input or output signal represent 0 to full range voltage or current. The DC electronic load provide OCP test, OPP test and Short circuit simulation to effectively solve the application demands for power and automated testing.

If 40V is too little voltage for you, we also have higher options for 200V DC Electronic Load, 600V DC Electronic Load and 1200V DC Electronic Load.

Kindly check below special features for your reference:

● Flippable front panel and color touch screen allow convenient access and operation

● Provides four kinds of basic working mode such as CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
● Adjustable current slew rate, adjustable CV loop speed
● Ultra high precision voltage & current measurement
● OCP/OPP testing function
● 50kHz high-speed CC/CR dynamic mode
● 500kHz high-speed voltage and current sampling rate
● Timing & discharging measurement for batteries
● Short circuit test mode
● Auto mode function provides an easy way to do complicated test
● Dynamic frequency sweep function for determining worst case voltage peaks*
● Non linear load mode function makes the simulated loading current more realistic*
● Supports external analog control function*
● V-monitor/I-monitor
● LED load simulation function
● Full protection: OCP, OPP, OTP, over voltage and reverse alarm
● Up to 20 units master/slave parallel control
● Front panel USB interface supports data import and export
● SCPI language and standard rack size make it ideal for ATE System integration
● Smart fan control with lower noise and better for environment
● Multi versions to meet the cost performance and different applications
* Only professional Electronic Load units support these functions

40V DC Electronic Load,programmable electronic load,programmable dc electronic load,high power DC electronic load

APM Technologies Ltd , https://www.apmpowersupply.com