What is the difference between s and set instructions in Siemens PLC - Database & Sql Blog Articles

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

The probe capacitor polarity needle has a head diameter of 5.8. The total length of the 7-pin and 12-pin needles is 5.

S is set according to the RLO state, and SET sets the RLO state.
1. S is set: If RLO=1, the addressing bit can be set to “1” using the set command (S).
E.g:
AI0.0
SQ0.0// If I0.0 is 1 (RLO=1), Q0.0 is also 1; if I0.0 is 0 (RLO=0), Q0.0 is also 0.
2. SetRLO is set: The RLO signal state can be set to "1" using the RLO Set (SET) instruction.
E.g:
SET / / set RLO
=M0.1//RLO is 1, then M0.1 is also 1.